On 24 August 2026, heavy rain turned roads across Delhi-NCR into slow-moving rivers. ITO, Munirka, NH 48 and Noida were among the worst hit. Fifteen flights were diverted from Delhi airport, and Gurugram asked offices to let staff work from home. Safdarjung had already logged 246.2 mm of rain by that date, roughly 29% above normal for the month.
If you live in an Indian city, none of this feels new. Every monsoon brings the same pictures, and the obvious question is why.
First, a simple definition. Urban flooding happens when rain arrives faster than a city’s drains can carry it off, so water pools on streets, in underpasses, in basements and in low-lying colonies. The National Disaster Management Authority (NDMA) treats it as a different problem from river flooding, since in cities it mostly comes from short, intense rain falling on built-up land (NDMA guidelines, 2010).
Let’s look at why it happens, how a drainage system works, and where underground pipes fit in.
Why Indian Cities Flood Every Monsoon
It’s rarely one thing. Usually a few causes stack up.
Rain that comes in bursts
Drains are planned around the rainfall a city expects. When a downpour far exceeds that, water has nowhere to go but the road. Delhi had its wettest first week of August in 15 years this year, which gives you a sense of how quickly things can tip over.
Surfaces that don’t soak anything up
Soil and grass absorb rain. Concrete, tarmac and rooftops send almost all of it straight to the drains. An NCAER commentary from May 2025 names the sealing of urban land as a major factor and mentions satellite imagery showing green cover in some metro areas down by more than 80 per cent. NDMA makes a similar point: the more a catchment is built over, the higher and faster the flood peaks.
Drains planned for a smaller city
Many stormwater networks were laid decades ago, when the city covered less ground and rain ran off less of it. The pipes didn’t change, but the city around them did.
Silt and waste. A drain choked with mud, plastic and construction debris simply carries less. This is the most visible cause, and also the one every household has a hand in.
Vanishing lakes and wetlands
Lakes, marshes and natural streams are a city’s overflow space. Bengaluru is said to have had 262 lakes in the 1960s, of which only about 10 still hold water. Chennai’s Pallikaranai marsh shrank from around 5,000 hectares to about 600 by 2010-11. Hyderabad lost over 3,000 hectares of wetland in roughly a decade. When these spaces go, rain has fewer places to settle.
How a city drainage system works
Think of it in three stages.
- Surface drains along roads and the grated inlets in the street collect rain from roads, pavements and open ground.
- Underground pipes and channels take that water, plus runoff from buildings, away from where people live and travel.
- Outfalls are the exit points: a river, a lake, the sea, or a treatment plant for sewage.
A city also deals with two quite different kinds of water, and they work best when kept apart.
Rainwater runs off roofs, roads and open ground, and a stormwater drainage network carries it away. Wastewater and sewage come from kitchens, bathrooms and toilets, and a sewerage system takes them to treatment. When both share the same pipes, a heavy downpour can overload everything at once and push sewage back up through drains.
Where underground drainage pipes fit in
An underground drainage system is the buried middle layer of all this. It moves rainwater and wastewater away from buildings and compounds so they don’t sit around foundations, driveways and basements.
What a buried pipe does over the years depends on three things:
- The material. Underground, a pipe faces damp soil and, for wastewater, harsh chemicals and gases. Pipes that corrode or crack leak into the ground, and that slowly weakens the soil around them.
- The joints. Most pipeline trouble starts where two pieces meet. A tight, watertight joint keeps water in and soil and roots out.
- The inside surface and access points. A smooth interior keeps water moving, and gully traps and inspection points let someone find and clear a blockage early.
Kothari’s UPVC Underground Drainage System, for example, is built from leak-proof, anti-rodent, corrosion-resistant pipes. The SWR (Soil, Waste and Rainwater) system can be buried without rusting or wearing out from sewer gases and harsh chemicals, has a smooth interior that helps prevent blockages, and uses a KWIK-sil rubber ring push-fit joint for a watertight, simple installation. We cover the product side in our guide to PVC drainage fittings and our post on underground drainage systems.
Pipes are one link in a longer chain, though. They work only as well as the drains feeding them, the outfall they empty into, and the upkeep they get.
Beyond the Pipes: Reducing Waterlogging in Cities
Flooding is never fixed by one measure. The NDMA guidelines lean on several working together:
- Desilting before the monsoon, so drains have their full carrying room when the first heavy rain arrives.
- Rainwater harvesting in buildings, which keeps roof water out of the drains and recharges groundwater.
- Soak pits and permeable surfaces, which let rain sink in where it falls. NCAER notes Mumbai made soak pits mandatory in 2023.
- Protecting lakes, wetlands and natural channels, which NDMA lists alongside rain gardens and detention ponds as part of good drainage design.
- Keeping waste out of drains, the simplest one on the list.
What you can check near your own home
You don’t need an engineering background. A walk around your building before the monsoon tells you a lot.
- Ask your builder, society manager or plumber whether rainwater and sewage run in separate lines.
- Open a gully trap or inspection point. If it’s buried under paving or full of debris, that’s worth fixing.
- Clear roof outlets and compound drains of leaves, plastic and silt before the first big rain.
- If your plot or building is meant to have a soak pit or rainwater harvesting arrangement, check that it still works.
- Look at the nearest public drain. If it’s piled with dumped waste or half covered over, flag it to your society or local body early.
Kothari’s drainage range
- UPVC Underground Drainage Piping System: solid-wall, leak-proof, anti-rodent, corrosion-resistant pipes for wastewater and drainage. Fittings include self-fit couplers, Y-pieces, tees, reducers, cross tees and a square gully trap with jali.
- Underground Double Wall Corrugated (DWC) pipes: a flexible, durable underground drainage pipe.
- Foamcore Underground Drainage Piping System: a lightweight multilayer drainage solution.
- SWR (Soil, Waste and Rainwater) system: carries wastewater and rainwater away from buildings, used for soil discharge, waste removal, ventilation and rainwater drainage.
Our certifications include ISO 9001 and BIS IS 15778 / IS 4985. If you’re looking at rainwater pipes specifically, our Rainwater Pipes buyer’s guide is a good place to start.
Conclusion
Cities flood because several things line up at once: sudden heavy rain, a lot of paved ground, drains planned for an earlier version of the city, blockages, and fewer natural places for water to go. Underground pipes have a real role in that, alongside desilting, harvesting and protected waterways.
If you’re planning drainage for a building, society or project and want to talk it through, get in touch with our team.
FAQs
Why do Indian cities flood every monsoon?
Usually a mix of causes: short, heavy bursts of rain, paved surfaces, drains designed for lighter rainfall, blockages, and the loss of lakes and wetlands. It varies from city to city.
What is stormwater drainage?
It’s the network of surface drains, channels and underground pipes that carries rain runoff from roads, roofs and paved areas to an outfall like a river, lake or the sea.
What is the difference between stormwater drains and sewers?
Stormwater drains carry rainwater. Sewers carry household wastewater and toilet waste to treatment. Keeping them separate stops heavy rain from overloading the sewer.
What is an underground drainage system?
A set of buried pipes and fittings that takes wastewater and rainwater away from buildings and compounds, usually with gully traps and inspection points so the line can be checked and cleared.
How can pipes reduce waterlogging?
Well-chosen, properly laid and well-jointed pipes help move water away from buildings and streets. They work best alongside surface drains, desilting, soak pits and protected natural channels.
What can residents do to reduce flooding near their homes?
Keep roof and compound drains clear, never dump waste in drains, make sure gully traps and inspection points are reachable, ask about pre-monsoon desilting, and use soak pits or rainwater harvesting where they apply.


